Spectra T950 - Page 478

Chapter 15 — Maintaining the Drives Updating Drive Firmware
November 2016 User Guide—Spectra T950 Library
478
7. Selecttheupdatepackage.
Note: Updatepackagesmaybefoundonthesourcesdescribedinthe
tablebelow.Eachdrivefirmwarepackagecontainsfirmwarefor
onlyonedrivegeneration.
8. ClickNext.TheDriveStagingDetailsscreendisplays.
Source Description
Spectra Logic Selectanddownloadthedesireddriv efirmwarepackagefromSpectraLogic ’s
packageserv ertothememorycar dintheLCM.
Notes:
 Thelibrarymusthav eaconnectiontotheInter ne tbeforeyoucanusethisoption
(see
ConfigureaPackageServeronpage139formoreinformationabout
configuringnetworksettings).
 Ifdi rectedtodosoby SpectraLogicTechnicalSupport,updatetheIPaddress
andpackagedirectoryfortheSpectraLogicpackageserver(see
Configurea
PackageServeronpage139formoreinformationaboutconfiguringapackage
server).
Configured
Package Server
(server name varies)
Selectthedesireddrivefirmwarepackagestoredonapreviouslyconfigured
packageserver,ifyouhaveoneavailable.
Note: Thisoptionisonlyav aila bleifyoupreviouslyconfig uredapackageserv er.
(See
ConfigureaPackageServeronpage139formoreinformationabout
configuringapackageserver).
Memory Card Selectthedesireddrivefirmwarepackagefrompackagesalreadystoredonthe
memorycardintheLCM.
USB Device SelectthedesireddrivefirmwarepackagefrompackagesstoredonaUSB
device.ThereisabriefdelaywhilethelibraryaccessestheUSBdevicewhen
youselectthisoption.
Notes:
 TheUSB DeviceoptionisonlyavailableifyoupreviouslyconnectedaUSB
devicecontainingtheupdatepackagein
Step2onpage476.
 TheupdatepackagemustbestoredintherootdirectoryoftheUSBdevice.