Spectra T950 - Page 557

Appendix D — Specifications Tape Drive and Media Specifications
November 2016 User Guide—Spectra T950 Library
557
TS11x0 Technology Physical Label Specifications
 Labelstockmustfitwithinthelabelrecessonthefaceofthecartridge
withoutcurlinguponthesidesorends(88.5mmX11.9mm+0/–0.4).
 Minimumlengthsufficientforthequietzones,start‐stop,anddata
characters(nominal85.75mm).
 Minimumwidthnolessthan1.5mmnarrowerthanthecartridgelabel
recesswidth.Cornersarecutwitha1.5mmradius.
 Maximumlabelthickness,includingtheRFIDtag,ifpresent,together
withanyassociatedlayersandadhesivescannotexceed0.75mm.
 Thelabelandadhesivemusthaveanenvironmentalperformanceto
matchorexceedtheenvironmentalspecificationsofthecartridgeto
whichitisapplied.