Notes:
1) Available at the library’s front panel touch screen only.
2) Requires LTO-4 or later generation Fibre Channel drives.
3) Only available with a purchased key.
4) Do not use any Advanced Utilities except those listed here unless instructed
to do so by SpectraGuard
®
Support.
5) Requires LTO-5 or later generation Fibre Channel drives.
6) Requires LTO-6 or later generation Fibre Channel drives.
7) Requires LTO-5 or later generation Fibre Channel or TS11x0 Technology
drives.
Library user types: Superuser, Administrator, and Operator
Feature Availability: This feature is available to this user type:
S) Superuser – Controls all aspects of library use, configuration, and security.
A) Administrator – Performs all actions except creating or editing library users,
and accessing encryption.
O) Operator – Moves, imports, and exports media.
Go to General (Cont.)
General
Storage Partition
Storage Pool
– Import
– Export/Exchange
Entry/Exit Pool
– Import
– Export/Exchange (Full Chambers)
– Export/Exchange (Pop. Chambers)
Recycle Encrypted Media
Cleaning Partition
– Import
– Export/Exchange
– Export/Exchange Expired
Rotation Manager
Advanced
– Advanced Import/Export
Import/Export TeraPack Cases
Import/Export
O, A, S
1
Partition
Source (for media move)
Destination (for media move)
Move Queue (defined moves)
View Source Slot
Find by Barcode
Start Moves (defined moves)
Start in Background (defined moves)
Advanced
– Upload Moves
– Download Inventory
Inventory
Inventory
O, A, S
Partition Selection
– Drives Status > Drives screen
– Media Status > Inventory screen
Robotics Status
– Run All Motion Basic Tests
– Robot Utilization by Hour
Power Status
Fans Status
TAPs
Power Usage
Density
General Status
General Status
O, A, S
Maintenance
Package Update
A, S
3
General (Cont.)
Media Lifecycle
Management
O, A, S
Media Lifecycle Management
Report
Partition
Report
– Media Health
– Remaining Capacity
– Load Count
– Write Errors
– Cleans Remaining
– Born on Date
– Exported Media
– Last Write Time
– Last Read Time
Save Report
Barcode Filter
Metric
– Power Consumption
– Drive Write Performance
– Drive Read Performance
– Storage Density
Target
Metrics
Metrics
O, A, S
Maintenance (Cont.)
Select Profile to Send Log Set
Select Ticket Type
Profile Summary
Confirm and Submit Ticket
Send Log Set
New Profile
Remove
Edit Profile
Manage Profiles
Configure Alarms
Log Forwarding
AutoSupport
A, S
Media Lifecycle Management
Media Lifecycle Management Tools
Discover Media
– Select Partition
Stop Discovery (only visible when
Discover Media is running)
Pause PostScan (only visible when
PostScan is running)
Manual PostScan
Delete MLM Records
Download MLM Database (remote
access only)
Download DLM Database (remote
access only)
Configuration
S: Robotic Control Path
Shared Library Services
New
Summary
Edit
Delete
Global Spare
– Global Spare Usage
S: Encryption
(Encryption user logged in)
– BlueScale
2
– BlueScale Pro version
2, 3
– Spectra SKLM
3, 7
–KMIP
3, 6
S: Spare Drives (Global Spares)
Partitions (Cleaning or Storage)
A, S
Name and Media Type
C/S: Name
C/S: Media Type
S: Advanced
– Emulation
Chambers and Drives
C/S: Storage Chambers
S: EE Chambers
S: Drives
S: Cleaning Partition
Go to Configuration (Cont.)
S: Fibre Channel Loop IDs (Drives)
S: Partition Users
S: Robotic Path Visibility
C/S: Save Library Configuration
C/S: Save Partition
S: Exporting F-QIP Configuration (RIM)
Address
Fibre Mode
S: MLM Media Verification
PreScan
– Enable PreScan
PostScan
– FullScan
– QuickScan
– QuickScan using Global
Spare
– Scan After Time (Days)
– Scan After Write
– Scan After Read
Security
Switch User
O, A, S
Library Users
Users
–Delete
–Edit
Add/Update User
– User
– Password
–User Type
Edit Users
A, S
Encryption User Login
Configure
– Single User Mode
– Multi-User Mode (BlueScale
Encryption Pro only)
Spectra SKLM
3, 7
KMIP
3, 6
Check Key Files
Import Key
Add Key
– Moniker
Export Key
Delete Key
Encryption Configuration
Encryption
S
Library Controller: Login
7
7
7
3
Configuration (Cont.)
Enable MLM
Enable Alerts for Non-MLM
Media
Enable Alerts for Load Count
Discrepancies
Minimum Cleaning Passes
Before Warning
Maximum Tape Loads Before
Warning
Enable Media Auto Discovery
Minimum Idle Minutes Before
Auto Discovery
Convert to Broadcast Hours
Override Broadcast Bit Rate
PostScan Blackout Periods
Media Lifecycle Management
Settings
Media Lifecycle
Management
A, S
System (Cont.)
A, S
System Setup—Other Settings
Library Name
Web Server Port
Refresh Rate
Auto Logout Timeout
Online Access to Spectra Logic
Drive Performance Monitoring
Power Consumption Monitoring
Enable Automatic Power-Up
After Power Failure
Enable SSL
Enable SNMP Agent
– SNMP Settings
Enable Soft Power
Syslog Server IP Address
BlueScale Vision IP Address
Network Settings
Mail Users
Auto Configuration Save
Routine Maintenance
Date and Time
Configuration (Cont.)
Drives (DLM)
A, S
Go to Configuration (Cont.)
System
A, S
Hardware ID
Key
–Save
Currently Installed Keys
Drives
Drive Traces
5
Drive Performance
Drive Firmware Update
Drive n
– Add
– Remove
– Replace
– Clean
–Detail
– DLM Report
–Test
– Reset
1
1
1
Controllers
Controllers
A, S
Add
Remove
Replace
Failover
1
1
1
System Setup—Option Enablement
Status Bar
System Status
System Messages
Refresh
HHM Notification (when maintenance
threshold is reached)
Send AutoSupport Ticket > Send Log Set
Remote Support
BlueScale Vision Camera (when
enabled)
Last Refresh (time and date)
BlueScale Software Version
Library IP Address (local access)
–OR–
Library Name (remote access)
Go to Maintenance (Cont.)
Motion Diagnostics
Utilities
Traces
System Traces
Component Traces
Tools
A, S
Basic Utilities List
Upload Backup Configuration
Advanced Utilities List
– Save MLM Database
– Restore MLM Database
– HHM: View Data
4
Motion Diagnostics List
Previous Results
Diagnostics
A, S
Begin Library Update
Manage Packages
Begin Drive Update
Manage Package Servers
EtherLib Status
Auto Download Options
To Next Page
Loading...
