Spectra T950 - Page 94

Chapter 3 — Introducing the BlueScale User Interface Using the BlueScale User Interface
November 2016 User Guide—Spectra T950 Library
94
Afterthelibrarycompletesitsinitializationsequence,theLibrary
Controller:Loginscreendisplaysonthelibraryoperatorpanel.ThisLogin
screenalsodisplayswhenyouaccessthelibraryremotelyusingthe
BlueScalewebinterface(RLC),aswellaswhenyouswitchusersorwhen
thelibraryautomaticallylogsoutthecurrentuserifauto‐logoutisenabled.
Ifthereisnointeractionwiththeoperatorpanelwithin30secondsafterthe
Loginscreendisplays,theLoginscreenisreplacedbythepre‐login
GeneralStatusscreen.ThisGeneralStatusscreenprovidesat‐a‐glance
statusforthelibraryanditscomponentswithoutrequiringyoutologinto
thelibrary.Youcanviewthestatusoftheentirelibraryoraspecific
partition.
Note: Thepre‐loginGeneralStatusscreendoesnotdisplaywhenyou
accessthelibraryremotelythroughtheBlueScalewebinterface.
Figure 50 The Library Controller: Login screen.
Figure 51 Log in from the pre-login General Status screen.
Touch to display the Library
Controller: Login screen