Operation 5
Handling the battery
2
1
4
3
5060_003-142
– Position the guide bolt (1) directly under-
neath the slotted hole (2).
NOTE
The forks of the hand pallet t
ruck should be
lowered sufficiently far tha
t the guide bolt (1)
can be slid under the bottom
plate (4) of the
forklift truck.
– Lift the forks of the hand pallet truck and
guide the guide bolt into the slotted hole until
the stop plate (3) is against the underside of
the truck’s bottom plate (4).
– Apply the parking brake on the hand pallet
truck to secure it against rolling away.
5060_003-143
8
9
7
– Carefully pull the battery (8) out of the
battery compartment until it reaches the
battery stop (9) on the external roller
channel.
– Fully apply the safety lever (7) by moving
it in the direction of the arrow in front of the
battery.
– Lower the forks of
the hand pallet truck until
the guide bolt of t
he stop plate is completely
clear of the slott
ed hole in the bottom plate.
– Release the parking brake on the hand
pallet truck.
The battery is now ready to be transported.
55
048011501 EN - 12/2015 275
To Next Page
Loading...
