WEILER E2850 REMIXING TRANSFER VEHICLE
4-9
Transporting
4
Trailering Machine
4. Use Platform Shift Switch to center platform, then
use Platform Shift Lock Lever (1) to lock platform in
center position.
5. Shutdown machine. Refer to
"Machine Shutdown
Procedure"
, page 3-11.
Follow appropriate regulations and procedures for securely chocking and tying-down machine to
trailer prior to transport.
NOTICE: Do not attach tie-down devices to the truck push roller assembly.
6. Install tie-downs at locations shown and chock
wheels.
Tie-down lugs are provided at front (2), rear (3),
and on storage hopper frame (4). Tie-down elevator/
dump hopper to prevent motion during transport.
NOTICE: When transporting the machine on a trailer,
cover the exhaust outlet. Turbocharger damage may
result if turbocharger turns without engine running.
WARNING
Improper tie-downs can allow load to shift or fall, resulting in over width
of load or loss of vehicle control. Death or serious injury possible to driver,
pedestrians, or motorists.
Ensure tie-downs are of proper quantity, condition, and size. Install and
tighten securely.
To Next Page
Loading...
