Weiler E2850 - Conveyor Auger;Footshaft Bearings - Grease; Conveyor Idler Bearings - Grease

WEILER E2850 REMIXING TRANSFER VEHICLE
5-39
Maintenance
5
Maintenance Procedures
(7) Conveyor Auger/Footshaft Bearings - Grease
Twelve shots - two fittings (one fitting on each side of
hopper).
Twelve shots - two fittings (remote fittings on right
side of elevator).
(8) Conveyor Idler Bearings - Grease
Twelve shots - four fittings (one remote fitting on
each side of machine and one fitting on bearing on
each side of machine).
7
7
8
8
8
8