Weiler E2850 - Rear Steer Auto Center Switch; Rear Steer Manual Switch; Rear Steer Indicator Lights; Elevator Reverse Switch

1
WEILER E2850 REMIXING TRANSFER VEHICLE
2-6
Machine Controls
2
Machine Controls
(5)
Rear Steer Auto Center Switch
Functions in work low range only.
(6) Rear Steer Manual Switch
Functions in work low range only.
(7) Rear Steer Indicator Lights
Illuminate when rear wheels are steered left or right.
(8) Elevator Reverse Switch .
(9) Truck Signal Light Raise/Lower Switch (Optional)
Lights will strobe for 30 seconds. Switch can be bumped down to stop lights from strobing.
(10) Truck Signal Light Move/Hold Switch (Optional)
Push and hold up to center wheels for straight
tracking.
Push left to steer rear of machine left.
Push right to steer rear of machine right.
Push up and hold to run elevator in reverse.
Push up to strobe lights in an upward motion.
Push down to strobe lights in a downward
motion.
Push up to flash lights signaling truck move
position.
Push down to turn lights on solid signaling
truck hold position.
5
6
9
8
10
7