1
WEILER E2850 REMIXING TRANSFER VEHICLE
3-2
Operating Instructions
3
Sound Levels
SOUND LEVELS
Sound pressure and sound power levels were determined according to test procedures specified in
ISO 3744 and ISO 11201. Guaranteed per EU Directive 2000/14/EC.
Equivalent Continuous A-Weighted Sound Pressure at Operator’s Ear . . . . . . . . . . . .L
Aeq
= 97 dB(A)
Representative Sound Power Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L
WA
= 117 dB(A)
The stated sound levels are representative for a given operating condition. Operating conditions may
vary at each jobsite. The actual sound levels for your application and operating conditions may be
different.
VIBRATION LEVELS
The hands and arms are subjected to a weighted root mean square acceleration that is less than
2.5 m/sec
2
.
The whole body is subjected to a weighted root mean square acceleration that is less than 0.5 m/s
2
.
Measurements are obtained on a representative machine according to the procedures specified in
ISO 2631/1 and ISO 5349.
To Next Page
Loading...
