Weiler E2850 - Steering Cylinders - Grease; Steering Knuckles - Grease; Tie Rod Ends - Grease

1
WEILER E2850 REMIXING TRANSFER VEHICLE
5-46
Maintenance
5
Maintenance Procedures
(1) Steering Cylinders - Grease
Two shots - eight fittings (two fittings each steering
cylinder).
(2) Steering Knuckles - Grease
Two shots - two fittings on each steering pivot (one
fitting on each upper and lower king pin).
(3) Tie Rod Ends - Grease
Two shots - one fitting on each end of tie rod.
1
2
3