WEILER E2850 REMIXING TRANSFER VEHICLE
5-1
Maintenance
5
Safety Messages
SECTION 5: MAINTENANCE
SAFETY MESSAGES
Refer to "Machine Shutdown Procedure", page 3-11, for instructions.
Read Operator’s and Maintenance Manual and safety signs before performing
maintenance on machine.
Wear personal protective equipment (PPE).
Always wear:
•Eye protection
•Safety shoes or boots
Some working conditions and regulations may require the use of other
appropriate PPE, such as hearing protection, hard hat, gloves, face
shield, or any other PPE necessary to provide proper safety protection for
the work being performed.
Follow Shutdown Procedure before inspecting, fueling, cleaning,
transporting, lubricating, repairing, or servicing machine.
Pressurized fluid can penetrate body tissue and result in death or serious
injury. Leaks can be invisible. Keep away from any suspected leak. Relieve
pressure in the hydraulic system before searching for leaks, disconnecting
hoses, or performing any other work on the system. When searching for a
pressurized leak, use an object such as a piece of wood or cardboard. Keep
hands away. When loosening a fitting where residual pressure may exist,
slowly loosen fitting until fluid begins to leak. Wait for leaking to stop before
disconnecting fitting. Tighten all connections before re-pressurizing system.
Seek immediate surgical treatment if fluid is injected under the skin.
To Next Page
Loading...
