Weiler E2850 - Manual Hopper Switch; Windrow Control Station; Windrow Float Switch; Float Indicator Lamp

WEILER E2850 REMIXING TRANSFER VEHICLE
2-17
Machine Controls
2
Machine Controls
(4)
Manual Hopper Switch
NOTICE: Auger doors must be fully open to run storage
hopper augers and conveyor in reverse.
(5) Engine Stop Button
Windrow Control Station
On machines equipped with the optional windrow attachment, windrow controls are provided at the
main operator station and at rear of windrow attachment on left and right sides of machine. Windrow
control stations are equipped with lockable vandal covers and panel lights for low-light operation.
(1) Windrow Float Switch
NOTICE: Float control is canceled whenever Elevator
Raise/Lower Switch (A) is turned on.
(2) Float Indicator Lamp
Illuminates when Windrow Float is on.
Push up to turn hopper augers in forward
direction.
Push down to turn hopper augers in reverse
direction.
To stop engine quickly, press in.
To enable engine startup, pull out.
Push up to turn float on.
Push down to turn float off.
5
4
STOP
2
1
A