Weiler E2850 - Page 192

WEILER E2850 REMIXING TRANSFER VEHICLE
B-2
Electronic Display Error Fault Codes
1
Fault Codes
B
REMIX TRANSDUCER VOLTAGE
LOW
VOLTAGE IS BELOW .1 Vdc.
CONVEYOR TRANSDUCER
VOLTAGE HIGH
VOLTAGE IS ABOVE 4.9 Vdc.
CONVEYOR TRANSDUCER
VOLTAGE LOW
VOLTAGE IS BELOW .1 Vdc
FUEL VOLTAGE HIGH VOLTAGE IS ABOVE 4.9 Vdc.
FUEL VOLTAGE LOW VOLTAGE IS BELOW .1 Vdc.
GROUND SPEED SENSOR LOW/NO
SPEED ERROR
PUMP IS OUTPUTTING GREATER THAN 30 mA WITH NO
SPEED FOR 2 SEC
ERROR DESCRIPTION ERROR STATE