WEILER E2850 REMIXING TRANSFER VEHICLE
3-31
Operating Instructions
3
Driving Machine
6. Use Propel Lever (4) to move machine. Pull knob up
to move lever out of neutral. Maximum propel speed
is determined by Propel Speed Dial (5). Turn CW to
increase speed.
7. When driving machine, Propel 3-Speed Control
Switch (1) can be up-shifted as desired. Stop
machine before downshifting from Transport speed
to Work High speed.
Downshifting two-speed motor can be abrupt and may cause injury to
operator if shifted when machine is in motion.
Downshift motor only when machine is stopped, unless required by
emergency.
To Next Page
Loading...
