YASKAWA A1000 Technical Manual

B.3 Parameter Table
518 YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual
Note: Fault trace (i.e., the fault history) is not kept when CPF00, CPF01, CPF06, CPF24, oFA00, oFb00, oFC00, Uv1, Uv2, or Uv3
occur.
 U8: DriveWorksEZ Monitors
U6-98
(7F8H)
First Fault
First Option Fault
–––
U6-99
(7F9H)
Current Fault
Current Option Fault
–––
<18> Values shown here are for 200 V class drives. Double the value when using a 400 V class drive.
No. (Addr.) Name Description
Analog Output
Level
Unit Page
U8-01 to
U8-10
(1950H to
1959H)
DriveWorksEZ Custom
Monitor 1 to 10
DriveWorksEZ Custom Monitor 1 to 10
10 V: 100% 0.01% –
U8-11 to
U8-13
(195AH to
195CH)
DriveWorksEZ Version
Control Monitor 1 to 3
DriveWorksEZ Version Control Monitor 1 to 3
No signal output
available
––
No. (Addr.) Name Description
Analog Output
Level
Unit Page
All Modes
All Modes
All Modes
All Modes

YASKAWA A1000 Specifications

General

Type	AC Drive
Series	A1000
Input Voltage	200-240V, 380-480V
Frequency Range	0-400 Hz
Horsepower Range	0.5 to 1000 HP
Power Range	0.4 to 630 kW
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Braking	Dynamic Braking
Communication	Modbus
Safety	Safe Torque Off (STO)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Operating Temperature	-10 to +50°C
Storage Temperature	-20 to 60°C
Humidity	5 to 95% RH (non-condensing)
Enclosure	IP20