YOKOGAWA DL6000 Series User Manual

6-40
IM DLM6054-01EN
Setting the Time Width Mode (Mode)
Set the reference time.
Set reference time T1.
Set reference time T2.
When the Time Width Mode Is
“Between” or “Out of Range”
When the Time Width Mode Is “More than,”
“Less than,” or “Time Out”
Event Delay Menu
Press ENHANCED, the Type soft key, the Event Interval soft key, and then the Event Delay soft key
to display the following menu.
Set the reference time.
Set the time width mode (same as Event Cycle).
Press to configure the event 1.
(The same as configuring a trigger.)
Press to configure event 2.
(The same as configuring a trigger.)
Event Sequence Menu
Press ENHANCED, the Type soft key, the Event Interval soft key, and then the Event Sequence soft
key to display the following menu.
Set the reference time.
Set the time width mode (same as Event Delay).
Press to configure the event 1.
(The same as configuring a trigger.)
Press to configure event 2.
(The same as configuring a trigger.)
6.11 Triggering on Period, Delay, and Sequence Events

YOKOGAWA DL6000 Series Specifications

General

Brand	YOKOGAWA
Model	DL6000 Series
Category	Test Equipment
Language	English