YOKOGAWA DL6000 Series

Triggering
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Index
App
6-39
IM DLM6054-01EN
6.11 Triggering on Period, Delay, and Sequence
Events
Procedure
Event Cycle Menu
Press ENHANCED, the Type soft key, the Event Interval soft key, and then the Event Cycle soft key
to display the following menu.
Set the reference time.
Set the time width mode.
Press to configure the event.
(The same as configuring a trigger.)
Configuring Events (Event Setup)
Press the Event Setup soft key to display the following menu.
The event settings are the same as the trigger settings. For details about the settings, see the various
sections that explain triggering.
Set the event type.
(See the trigger type explanations for details.)