1-2
IM DLM6054-01EN
Rear Panel (DL6000)
WARNING
CAUTION
VIDEO OUT
(XGA)
PROBE POWER
( )
12 V DC
TRIG IN
TRIG OUT
ETHERNET
100BASE-TX
ACT
LINK
USB
GO/NOGO
MAIN POWER
OFF ON
100 - 120/220 - 240 V AC
300 VA MAX 50/60 Hz
MODEL
NO.
SUFFIX
Made in Japan
No Auto-MDIX
Power connector
→ section 3.3
Main power switch
→ section 3.3
USB port for PCs
Use to view the DL6000/DLM6000 display on an external display.
→ section 15.3
Video signal output terminal
Use to connect the DL6000/DLM6000 to a network.
→ section 14.1
Transmits GO/NO-GO result signals. → section 15.4
GO/NO-GO output connector
Use to supply power to YOKOGAWA FET probes
and current probes.
→ section 3.4
Probe power terminal (optional)
Use to transmit trigger signals.
→ section 15.2
Trigger output terminal
Apply external trigger signals to this terminal.
→ section 15.1
External trigger input terminal
Use to connect the DL6000/DLM6000 to a PC that has a USB port.
→ Communication Interface User’s Manual, IM DLM6054-17EN
Use to save data to a
PC card.
→ section 13.1
PC card slot
1.1 Top Panel, Front Panel, and Rear Panel
To Next Page
Loading...
