YOKOGAWA DL6000 Series User Manual

14-15
IM DLM6054-01EN
Ethernet Interface (Optional)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Index
App
TCP/IP Settings
On the DL6000/DLM6000 Web page, click LAN Configuration to display the TCP/IP setup page.
Transmits settings to the DL6000/DLM6000
Resets changed settings
TCP/IP settings
If you registered a user name and
password in the security settings
and enabled authentication, you
must enter the registered user
name and password here to
change the TCP/IP settings.
The current TCP/IP settings appear inside the browser window. You can change the settings in the
window. After you change the settings, click Submit to transmit them to the DL6000/DLM6000. Click
Reset to undo the changes that you made.
Security Settings
On the DL6000/DLM6000 Web page, click Security to display the security setup page.
Registers the settings
Resets changed settings
Old password
New password
Re-enter the new password
Authentication setting
ON: Enable authentication
OFF: Disable authentication
User name
The current security settings appear inside the browser window. You can change the settings in the
window. After you change the settings, click Registration to transmit them to the DL6000/DLM6000.
Click Reset to undo the changes that you made.
14.7 Using a PC to Monitor the DL6000/DLM6000 and Change Its Settings (Web Server)

YOKOGAWA DL6000 Series Specifications

General

Brand	YOKOGAWA
Model	DL6000 Series
Category	Test Equipment
Language	English