17-4
IM DLM6054-01EN
Code Message and Corrective Action Section
540 Unable to load a file containing logic waveforms. 13.5
541 Unable to load that file. Its extention is invalid. 13.5
Printer Errors
Code Message and Corrective Action Section
550 Printer error.
Confirm the printer status.
—
551 Cannot detect printer.
Turn ON the printer.
Check connections.
—
552 Communication error.
Check all connections and make sure all devices are on.
—
553 Paper not loaded correctly.
Set the paper correctly.
12.1
554 Printer over heat.
Power off immediately.
—
555 Move the release arm to the “HOLD” position. 12.1
556 No built-in printer on this model.
Check the specifications to see whether or not the optional printer is provided.
Page iii
557 Image creation failure. Working memory space may be insufficient.
Maintenance service is required.
—
Network Errors
Code Message and Corrective Action Section
600 Invalid network parameter settings.
Check the network parameters.
Chapter 15
601 Unable to connect to the server.
Check the network settings and configuration.
Chapter 15
602 Invalid file server settings.
Check the file server settings.
Chapter 15
603 Invalid fire wall settings.
Check the fire wall settings.
Chapter 15
Execution Errors
Code Message and Corrective Action Section
650 Running.
Stop and execute again.
4.7
651 Accessing file.
Abort or wait until it is completed, and execute again.
—
652 Printing.
Abort or wait until it is completed, and execute again.
—
653 Processing action-on-trigger.
Abort or wait until it is completed, and execute again.
7.8
654 Processing zoom search.
Abort or wait until it is completed, and execute again.
10.10
655 Processing auto scroll.
Abort or wait until it is completed, and execute again.
—
656 Processing history search.
Abort or wait until it is completed, and execute again.
Chapter 11
657 Processing history replay.
Abort or wait until it is completed, and execute again.
Chapter 11
658 Processing statistical measurement.
Abort or wait until it is completed, and execute again.
10.3
660 Zone edit in process.
Terminate editing.
Chapter 7
661 Processing self test.
Wait until it is completed.
—
662 Acquisition in process in N Single trigger mode.
Press the RUN/STOP key or wait until the process is completed.
Chapter 6
17.2 Messages and Corrective Actions
To Next Page
Loading...
Need help?
General
