5-5
IM 701450-01E
5
Vertical and Horizontal Axes
Note
• The waveform data that goes off the waveform display frame from moving the vertical
position is handled as overflow data.
• If the display waveform goes out of the waveform display frame from moving the vertical
position during waveform acquisition, a chopped waveform is displayed as shown in the
following figure even if the vertical position is returned to its original position after stopping
the acquisition.
• Changing the vertical position also changes the valid data range. For details, see page 2-
2.
5.3 Setting the Vertical Position of the Waveform
To Next Page
Loading...
