13-16 IM 701450-01E
13.6 Accessing the DL7400 from a PC or
Workstation (FTP Server Function)
Procedure
X-Y
PHASE
MENU MENU
SETUP FILE
MISC
RESET
SELECT
MATH
SHIFT
GO/NOGO
CURSOR
MEASURE
HISTORY
PRINT
ACQ
START/STOP
IMAGE SAVE
DISPLAY
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
Creating User Accounts
1. Press MISC. The MISC menu appears.
2. Press the Network soft key. The Network menu appears.
3. Press the User Account soft key. The User Account dialog box opens.
4. Use jog shuttle & SELECT to enter the User Name. Specify anonymous if you
wish to allow access to all users. To restrict access, enter the user name using
up to 15 characters.
5. Use jog shuttle & SELECT to enter the Password using up to 15 characters.
Enter the password again for confirmation. If the user name is set to
anonymous, you do not have to enter the password.
6. Use jog shuttle & SELECT to enter the Time Out. The connection to the
network is automatically closed if there is no access to the DL7400 for the
specified time.
Executing the FTP Client Software
7. Execute an FTP client on the PC or workstation. Perform file operations using
the user name specified in step 4.
To Next Page
Loading...
