12-35
IM 701450-01E
12
Saving and Loading Data
12.12 Saving Screen Image Data
CAUTION
Do not remove the storage medium (disk) or turn OFF the power when the
access indicator or icon of the storage medium is blinking. Doing so can
damage the storage medium or destroy the data on the medium.
Procedure
X-Y
PHASE
MENU MENU
SETUP FILE
MISC
RESET
SELECT
MATH
SHIFT
GO/NOGO
CURSOR
MEASURE
HISTORY
PRINT
ACQ
START/STOP
IMAGE SAVE
DISPLAY
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
1. Press SHIFT+IMAGE SAVE (MENU). The IMAGE menu appears.
Selecting the Data Format
2. Press the Format soft key. The Format menu appears.
3. Press the TIFF, BMP, Post Script, PNG, or JPEG soft key to select the data
format.
Setting the Color Mode
(Selectable only when the data format is set to TIFF, BMP, PNG, or JPEG in step 3)
4. Press the Color soft key. The Color menu appears.
5. Press the ON, ON (Revers) (white background), ON (Gray) (grayscale), or OFF
to select the color mode.
Setting the Compression Mode
(Selectable only when the data format is set to BMP in step 3 and the color mode
is set to “ON, ON (Revers) or ON (Gray) in step 5)
5. Press the Compression soft key to select ON or OFF.
Setting Comments
5. Press the Comment soft key. A keyboard used to enter values and strings
appears.
6 Use jog shuttle & SELECT to set the comment.
Enter comment using up to 25 characters.
To Next Page
Loading...
