12-36 IM 701450-01E
Selecting the Save Destination Medium
7. Press the File List soft key. The save destination File List window appears.
8. Use jog shuttle & SELECT to select the save destination medium (indicated by
brackets).
Selecting the Save Destination Directory
Perform this operation when directories are present on the medium.
9. Use jog shuttle & SELECT to select the save destination directory (indicated by
< >). The selected medium/directory is displayed in “Path=......” located in the
upper-left of the File List window.
Select <..> to move to the parent directory.
Setting the File Name
10. Press the File Name soft key. The file name setup menu appears.
11. Use jog shuttle & SELECT to set the auto naming function.
• If you select ON, the auto naming function is enabled.
• If you select OFF, the auto naming function is disabled.
12. Use jog shuttle & SELECT to call up the keyboard and set the file name.
Enter the file name using up to 14 characters.
Executing/Aborting the Save Operation
13. Press IMAGE SAVE. The screen image data is saved to the storage medium.
Pressing IMAGE SAVE again aborts the save operation. While the data is being
saved, the
icon is displayed at the upper left corner of the screen.
Note
Thumbnails of the saved screen image data can be displayed. For details, see section 12.13.
12.12 Saving Screen Image Data
To Next Page
Loading...
