12-43
IM 701450-01E
12
Saving and Loading Data
12.14 Changing the File Attributes and Deleting Files
CAUTION
Do not remove the storage medium (disk) or turn OFF the power when the
access indicator or icon of the storage medium is blinking. Doing so can
damage the storage medium or destroy the data on the medium.
Procedure
X-Y
PHASE
MENU MENU
SETUP FILE
MISC
RESET
SELECT
MATH
SHIFT
GO/NOGO
CURSOR
MEASURE
HISTORY
PRINT
ACQ
START/STOP
IMAGE SAVE
DISPLAY
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
1. Press FILE. The FILE menu appears.
2. Press the Utility soft key. The Utility menu and the File List window appear.
Selecting the Storage Medium/Directory
3. The procedure is the same as steps 14 and 15 on page 12-22.
Changing the File Attribute
4. Turn jog shuttle to select a file.
5. Press the Attr soft key. The attribute of the selected file changes.
To delete a file, change the file attribute to R/W (read/write)
To Next Page
Loading...
Need help?
General
