8-12 IM 701450-01E
8.5 Displaying X-Y Waveforms
<For a description of this function, refer to page 2-19.>
Procedure
X-Y
PHASE
MENU MENU
SETUP FILE
MISC
RESET
SELECT
MATH
SHIFT
GO/NOGO
CURSOR
MEASURE
HISTORY
PRINT
ACQ
START/STOP
IMAGE SAVE
DISPLAY
• To exit the menu during operation, press ESC located
above the soft keys.
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
Selecting the Display Mode
1. Press SHIFT+DISPLAY(X-Y). The X-Y menu appears.
2. Press the Mode soft key. The Mode menu appears.
3. Press the T-Y, X-Y, or T-Y&X-Y soft key to select the mode.
Steps 4 to 11 are necessary only when X-Y or T-Y&X-Y is selected.
Selecting the X-Axis Mode
4. Press the X Axis soft key to select Single or Dual.
To Next Page
Loading...
Need help?
General
