13-12 IM 701450-01E
13.5 Sending Periodic or Action Mail (SMTP Client
Function)
Procedure
X-Y
PHASE
MENU MENU
SETUP FILE
MISC
RESET
SELECT
MATH
SHIFT
GO/NOGO
CURSOR
MEASURE
HISTORY
PRINT
ACQ
START/STOP
IMAGE SAVE
DISPLAY
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT refers to the operation of
selecting/setting items and entering values using the
jog shuttle and SELECT and RESET keys. For details
on this operation, see sections 4.1 or 4.2.
• For a description of the operation using a USB keyboard
or a USB mouse, see section 4.3.
Setting the Mail
1. Press MISC. The MISC menu appears.
2. Press the Network soft key. The Network menu appears.
3. Press the Mail Setup soft key. The Mail Setup dialog box opens.
4. Use jog shuttle & SELECT to enter the Mail Server (IP address of the mail
server). If you are using DNS, you can specify the server by name.
5. Use jog shuttle & SELECT to enter the Mail Address (recipient mail address)
using up to 40 characters.
6. As necessary, use jog shuttle & SELECT to enter a comment using up to 30
characters.
7. As necessary, turn the jog shuttle to set Attached Image File to ON (attach the
image data) or OFF (not attach the image data).
Setting the Transmission Time of Period Mail
(For action mail, see “Setting Conditions for Sending Mail (Action Mail)” on the
next page.)
8. Use jog shuttle & SELECT to enter the MailBaseTime (time when mail is to be
sent).
9. Use jog shuttle & SELECT to set the Interval (interval for sending mail) in the
range of 1h to 24h. If you are only using action mail, set this to OFF.
To Next Page
Loading...
