8-19
IM 701450-01E
8
Waveform Display and Information Display
Turning ON/OFF the Waveform Label Display
X-Y
PHASE
MENU MENU
SETUP FILE
MISC
RESET
SELECT
MATH
SHIFT
GO/NOGO
CURSOR
MEASURE
HISTORY
PRINT
ACQ
START/STOP
IMAGE SAVE
DISPLAY
• To exit the menu during operation, press ESC located
above the soft keys.
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
1. Press DISPLAY. The DISPLAY menu appears.
2. Press the Trace Label soft key to select ON or OFF.
Explanation
Waveform Labels
You can arbitrary set the waveform label of each channel using up to eight characters.
The label is applied to Trace Label.
Turning ON/OFF the Waveform Label Display
You can select whether to display the label assigned to the channel of the displayed
waveform. For display examples, see page 1-6.
8.9 Setting Waveform Labels and Turning ON/OFF the Display
To Next Page
Loading...
