13-45
IM 701450-01E
13
Ethernet Communications (Optional)
13.10 Setting the FTP Passive Mode and LPR/SMTP Timeout
Explanation
You can enter special settings related to the FTP client, LPR, and SMTP. Normally,
these parameters do not need to be specified.
Turning ON/OFF the FTP Passive Mode
Turn this function ON when using the DL7400 behind a firewall* that requires the passive
mode. The default setting is OFF.
*A firewall is furnished on a system that has security features. It prevents intrusion from the
outside into the network system.
Setting the LPR Timeout Time
The DL7400 closes the connection to the printer if there is no response for a certain
period of time (timeout time) while it attempts to access the printer. The selectable range
is 0 to 3600 s. The default setting is 15 s.
Setting the SMTP Timeout Time
When a mail server is accessed from the DL7400 and connection cannot be established
after a certain period of time (timeout time), the DL7400 decides that the connection to
the mail server is not possible and closes the connection. The selectable range is 0 to
3600 s. The default setting is 15 s.
To Next Page
Loading...
Need help?
General
