Abbott CELL-DYN 3000 - Page 198

28 Oct
1997 21:57
CELL-DYN
®
3/35 Sample Loader TS Guide 9140234B-June 1997
VERIFICATION PROCEDURES
VP - 5.2 Tube Detect Sensor (Beam Block) Adjustment
3 - 73
3
Search
Book TOC
Go Back
6.
[NON-CE MARK ONLY]
- Adjust Gain (Fi
g
ure 3-34).
a. Attach Resistor tool between TP22 and GND (TP23).
b. Set volt meter to
AC
volts.
c. Connect positive (+) lead to R12 at end near RA14. Connect ne
g
ative (-) lead to GND (TP23)
(Fi
g
ure 3-34).