124
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_prog_generic_step2_ac.fm
Step 2: Configure Test Set and Mobile Station Parameters
Set Up Additional Connection Parameters
Depending upon the test application you are using, there may be other connection parameters to specify, such
as timeslot, timing advance, vocoder, or data rates and types.
In active cell mode, you may also choose to set up network parameters, such as base station identifier numbers
(for example, SID) and color codes.
All of these parameters are configured using the CALL subsystem.
To Next Page
Loading...
Need help?
General
