Agilent Technologies 8960 Series

129
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_prog_generic_step3_ac.fm
Step 3: Set Measurement Parameters
!
OUTPUT Test_set;”SET:DTXP:COUN 5”
OUTPUT Test_set;”SET:DTXP:TRIG:SOUR AUTO”
OUTPUT Test_set;”SET:DTXP:TIM 5”
!
! ******************************************************
! Configure Frequency Stability Measurement:
!
OUTPUT Test_set;”SET:FST:COUN 3”
OUTPUT Test_set;”SET:FST:TIM 10”
!
! ******************************************************
! Configure Analog TX Power Measurement:
!
OUTPUT Test_set;”SET:ATXP:COUN 5”
OUTPUT Test_set;”SET:ATXP:TRIG:SOUR AUTO”
OUTPUT Test_set;”SET:ATXP:TIM 15”