Agilent Technologies 8960 Series Reference Guide

142
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_prog_generic_step6_ac.fm
Step 6: Reconfigure Test Set and Mobile Station Connection Parameters
Figure 17. Process for Performing a Handoff (Handover)
Test Mode Considerations In test mode, you can either change the test set’s frequencies by using the
handoff (handover) commands, or directly control the RF generator and RF analyzer.
In either case, you must also send the appropriate test mode commands to the mobile station to move it to the
new channel.
Change Other Connection Parameters
You may also choose to change the mobile station transmit power level or cell power, or other connection
parameters such as timeslot or timing advance.
Yes
No
Start
Send commands to
change channel.
Send the CALL:STAT?
query command.
Enter response from
CALL:STAT? query.
Call connected?
Proceed with control
program.
Send CALL:END
command.
Invoke error
handler.

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English