297
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_fchannel.fm
CALL:FCHannel
CALL:FCHannel:WALSh
Function Sets/queries the Walsh code used for the forward fundamental channel. The Walsh codes allowed
for use with this command are part of a reserved codespace that has been created by fixing other
code channels to pre-determined values. Reserving this codespace eliminates the possibility of
conflicts that can arise with lower walsh code sets which are used in certain radio configurations.
Setting Range: CODE10|CODE14|CODE26|CODE30|CODE42|CODE46|CODE58|CODE62
Query Range: CODE10|CODE14|CODE26|CODE30|CODE42|CODE46|CODE58|CODE62
*RST Setting CODE10
Programming Example
OUTPUT 714;"CALL:FCHANNEL:WALSH CODE14"
!Sets the forward fundamental channel walsh code to 14.
To Next Page
Loading...
Need help?
General
