308
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_ms_reported_cap_cch.fm
CALL:MS:REPorted:CAPability:CCHannel:DEDicated
CALL:MS:REPorted:CAPability:CCHannel:DEDicated[:SUPPort]?
CALL:MS:REPorted:CAPability:CCHannel:DEDicated:FRAMe[:SIZE]?
CALL:MS:REPorted:CAPability:CCHannel:DEDicated:FORWard:RCONfig?
CALL:MS:REPorted:CAPability:CCHannel:DEDicated:REVerse:RCONfig?
Function This query only command returns the mobile station’s capability to support a dedicated control
channel (DCCH), as reported by the mobile station.
Query Range: YES|NO|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:CCHANNEL:DEDICATED:SUPPPORT?”
Function This query only command returns the mobile station’s capability to support different frame sizes
on the dedicated control channel (DCCH), as reported by the mobile station.
Returned values are 5 millisecond only, 20 milliseconds only, 5 or 20 milliseconds not dynamic, 5
or 20 milliseconds dynamic, or unknown.
Query Range: 5MS|20MS|NDYN|DYN|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:CCHANNEL:DEDICATED:FRAME:SIZE?”
Function This query only command returns the mobile station’s capability to support forward dedicated
control channels, as reported by the mobile station.
This query returns a comma-separated string of any combination of 3, 4, 5, or null.
Query Range: 3|4|5|null
*RST Setting null
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:CCHANNEL:DEDICATED:FORWARD:RCONFIG?”
Function This query only command returns the mobile station’s capability to support reverse dedicated
control channels, as reported by the mobile station.
This query returns a comma-separated string of any combination of 3, 4, 5, or null.
Query Range: 3|4|5|null
*RST Setting null
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:CCHANNEL:DEDICATED:REVERSE:RCONFIG?”
To Next Page
Loading...
