310
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_ms_reported_cap_fch.fm
CALL:MS:REPorted:CAPability:FCHannel
CALL:MS:REPorted:CAPability:FCHannel[:SUPPort]?
CALL:MS:REPorted:CAPability:FCHannel:FRAMe:MS5[:SUPPort]?
CALL:MS:REPorted:CAPability:FCHannel:FORWard:RCONfig?
CALL:MS:REPorted:CAPability:FCHannel:REVerse:RCONfig?
Function This query only command returns the mobile station’s capability to support a fundamental
channel, as reported by the mobile station.
Query Range: YES|NO|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:FCHANNEL?”
Function This query only command returns the mobile station’s capability to support a fundamental
channel with 5 ms frames, as reported by the mobile station.
Query Range: YES|NO|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:FCHANNEL:FRAME:MS5:SUPPORT?”
Function This query only command returns the mobile station’s capability to support radio configurations
on the forward fundamental radio channel, as reported by the mobile station.
This query returns a comma-separated string of any combination of 1, 2, 3, 4, 5, or null.
Query Range: 1|2|3|4|5|null
*RST Setting null
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:FCHANNEL:FORWARD:RCONFIG?”
Function This query only command returns the mobile station’s capability to support radio configurations
on the reverse fundamental radio channel, as reported by the mobile station.
This query returns a comma-separated string of any combination of 1, 2, 3, 4, 5, or null.
Query Range: 1|2|3|4|5|null
*RST Setting null
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:FCHANNEL:REVERSE:RCONFIG?”
To Next Page
Loading...
