Agilent Technologies 8960 Series

394
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_status.fm
CALL:STATus
CALL:STATus:PAGing:LEVel[:SELected]?
CALL:STATus:PAGing:STATe[:SELected]?
CALL:STATus:PILot:LEVel[:SELected]?
Function Queries the current paging level for the currently selected system type.
The forward paging channel level is set using the “CALL:PAGing” commands.
The optional [:SELected] keyword in this command specifies that the paging level being queried
applies to the current system type.
Query Range: 0 to -20 dB, 9.91 E+37
Resolution: 0.01 dB
*RST Setting 9.91 E+37
Programming Example
OUTPUT 714;"CALL:STATUS:PAGING:LEVEL:SELECTED?"
Function Queries the current paging level state for the currently selected system type.
The forward paging channel level is set using the “CALL:PAGing” commands.
The optional [:SELected] keyword in this command specifies that the paging state being queried
applies to the current system type.
Query Range: 1|0
*RST Setting 0 (Off)
Programming Example
OUTPUT 714;"CALL:STATUS:PAGING:STATE:SELECTED?"
Function Queries the current forward pilot level for the currently selected system type.
Forward pilot level is set using the “CALL:PILot” commands.
The optional [:SELected] keyword in this command specifies that the pilot level being queried
applies to the current system type.
Query Range: 0 to -10 dB, 9.91 E+37
Resolution: 0.01 dB
*RST Setting 9.91 E+37
Programming Example
OUTPUT 714;"CALL:STATUS:PILOT:LEVEL:SELECTED?"