Agilent Technologies 8960 Series - Page 395

395
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_status.fm
CAL L: S TATus
CALL:STATus:PILot:STATe[:SELected]?
CALL:STATus:QPCHannel[:LEVel][:RTCell][:SELected]?
CALL:STATus:QPCHannel[:LEVel]:RTPilot[:SELected]?
Function Queries the current forward channel pilot level state for the currently selected system type.
Forward pilot level on/off state is set using the “CALL:PILot” commands.
The optional [:SELected] keyword in this command specifies that the pilot state being queried
applies to the current system type.
Query Range: 1|0
*RST Setting 0 (Off)
Programming Example
OUTPUT 714;"CALL:STATUS:PILOT:STATE:SELECTED?"
Function Queries the current forward quick paging channel (QPCH) level, relative to the cell power level.
The forward quick paging channel level is set using the “CALL:QPCHannel” commands.
The optional [:SELected] keyword in this command specifies that the quick paging channel level
being queried applies to the current system type.
Query Range: 0 to -15 dB, 9.91 E+37
Resolution: 0.01 dB
*RST Setting 9.91 E+37
Programming Example
OUTPUT 714;"CALL:STATUS:QPCHANNEL:LEVEL:RTCELL:DIGITAL2000?"
Function Queries the current forward quick paging channel (QPCH) level, relative to the pilot level.
The forward quick paging channel level is set using the “CALL:QPCHannel” commands.
The optional [:SELected] keyword in this command specifies that the quick paging channel level
being queried applies to the current system type.
Query Range: +2 to -5 dB, 9.91 E+37
Resolution: integer
*RST Setting 9.91 E+37
Programming Example
OUTPUT 714;"CALL:STATUS:QPCHANNEL:LEVEL:RTPILOT:SELECTED?"