Agilent Technologies 8960 Series

To Next Page

To Previous Page

408

S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_traffic.fm

CALL:TRAFfic

CALL:TRAFfic:LEVel[:SELected]

CALL:TRAFfic:STATe[:SELected]

CALL:TRAFfic:WALSh

Function Sets/queries the level of the forward traffic channel.

NOTE This command applies to IS-95 traffic channel only. To make level changes to the

IS-2000 fundamental channel, see “CALL:FCHannel:LEVel[:SELected]”

Setting Range: 0 to -30 dB

Resolution: 0.01 dB

Query Range: 0 to -30 dB

Resolution: 0.01 dB

*RST Setting -15.6 dB

Programming Example

OUTPUT 714;"CALL:TRAFfic:LEVEL:SELECTED -10 dB"

Function Sets/queries the on/off state of the forward traffic channel.

NOTE This command applies to IS-95 traffic channel only. To make on/off state changes to

the IS-2000 fundamental channel, see “CALL:FCHannel:STATe[:SELected]”

Setting Range: 1|ON|0|OFF

Query Range: 1|0

*RST Setting ON

Programming Example

OUTPUT 714;"CALL:TRAFfic:STATE:DIGITAL95 OFF"

!Turns off the forward traffic channel.

Function Sets/queries the Walsh code used for the DIGital95 traffic channel.

*RST Setting CODE10

Programming Example

OUTPUT 714;"CALL:TRAFfic:WALSH CODE14"

!Sets the forward traffic channel walsh code to 14.

Other manuals for Agilent Technologies 8960 Series