449
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_fetch_fstability.fm
FETCh:FSTability
FETCh:FSTability:FERRor:ALL?
FETCh:FSTability:FERRor:AVERage?
Function Queries the full results of a frequency stability .
Measurement results are returned in the following order: minimum frequency error, maximum
frequency error, average frequency error, worst-case frequency error.
Query Maximum, minimum frequency error:
• Range: -500 E+3 to 500 E+3 Hz
• Resolution: 1 Hz
Average frequency error:
• Range: -500 E+3 to 500 E+3 Hz
• Resolution: 1 Hz
Worst-case frequency error:
• Range: -500 to 500 parts per million (ppm)
• Resolution: 0.01
Programming Example
OUTPUT 714;”FETCH:FSTABILITY:FERROR:ALL?”
!Returns minimum, maximum, average, and worst-case frequency error.
Function Queries the average frequency error measurement.
Query Range: -500 E+3 to 500 E+3 Hz
Resolution: 1 Hz
Programming Example
OUTPUT 714;”FETCH:FSTABILITY:FERROR:AVERAGE?”
To Next Page
Loading...
