To Next Page

To Previous Page

479

S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_initiate.fm

INITiate

INITiate:ON?

INITiate:<measurement mnemonic>:OFF

INITiate:COUNt?

INITiate:DONE?

Function Queries the measurements that are on. Returns a comma separated list of measurement

mnemonics.

TFER|WQU|NONE

Programming Example

OUTPUT 714;"INITIATE:ON?"

Function Deactivates the selected measurement. See “Measurement States” on page 220.

Only one measurement can be deactivated at a time. To stop one or more measurements and

leave them in the active state, use “ABORt” on page 251.

Programming Example

OUTPUT 714;"INITIATE:CPOWER:OFF" !Deactivates the channel power measurement.

Function Queries the number of measurements that have been initiated (are active). See “Measurement

States” on page 220.

Query Range: 0 to 10

Programming Example

OUTPUT 714;"INITIATE:COUNT?"

Function Queries (one at a time) which measurements, if any, are finished or have timed-out.

See “Measurement Event Synchronization” on page 231 for how to use this command.

See “Measurement States” on page 220 to understand the test set’s measurement states.

See “INITiate:DONE:FLAG:<measurement mnemonic>” on page 480 for include or exclude

commands.

TFER|WQU|NONE|WAIT

Agilent Technologies 8960 Series Reference Guide

Other manuals for Agilent Technologies 8960 Series