Agilent Technologies 8960 Series Reference Guide

527
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_setup_cfer.fm
SETup:CFERror
SETup:CFERror:TIMeout[:STIMe]
SETup:CFERror:TIMeout:STATe
SETup:CFERror:TIMeout:TIME
Function The setting form of this command performs two functions: (1) sets the FER (frame error rate)
measurement’s timeout value, and (2) sets the FER measurement’s timeout STATe to 1 (on).
The query form returns the FER measurement’s timeout value.
Setting Range: 1 to 200,000 seconds
Resolution: 1 second
Query Range: 1 to 200,000
*RST Setting 200 seconds, on
Programming Example
OUTPUT 714;"SETUP:CFERROR:TIMEOUT:STIME 200S”
!Sets timeout state to ON and sets the timeout time to 200 seconds.
Function Sets/queries the FER (frame error rate) measurement’s timeout state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Programming Example
OUTPUT 714;"SETUP:CFERROR:TIMEOUT:STATE ON”
Function Sets/queries the FER (frame error rate) measurement’s timeout setting to be used when the
timeout state is set to ON.
Setting Range: 1 to 200,000 seconds
Resolution: 1 second
Query Range: 1 to 200,000
*RST Setting 200 seconds
Programming Example
OUTPUT 714;"SETUP:CFERROR:TIMEOUT:TIME 200S”

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English