559
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_setup_saudio.fm
SETup:SAUDio
SETup:SAUDio:COUNt:STATe
SETup:SAUDio:COUPling
SETup:SAUDio:DETector[:TYPE]
Function Selects/queries the swept audio measurement’s multi-measurement count state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Programming Example
OUTPUT 714;"SETUP:SAUDIO:COUNT:STATE ON” !Turns on multi-measurement for the swept audio
measurement.
Function Sets/queries the audio generator’s coupling to the AUDIO OUT port.
Setting Range: AC|DC
Query Range: AC|DC
*RST Setting DC
Programming Example
OUTPUT 714;"SETUP:SAUDIO:COUPLING AC” !Select AC coupling to the AUDIO OUT port.
Function Sets/queries the type of level detector used in swept audio measurements.
Setting Range: RMS|PEAK
Query Range: RMS|PEAK
*RST Setting RMS
Programming Example
OUTPUT 714;"SETUP:SAUDIO:DETECTOR:TYPE PEAK” !Select the peak detector for the AF
analzyer.
To Next Page
Loading...
