Agilent Technologies 8960 Series - Page 566

566
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_setup_tferror.fm
SETup:TFERror
SETup:TFERror:CONFidence:REQuirement[:RATio]
SETup:TFERror:CONTinuous
SETup:TFERror:COUNt
Function
Sets/queries the test data service option frame error rate (TDSO FER) confidence requirement.
Setting Range: 0.10 to 5.00 percent
Resolution: 0.01 percent
Query Range: 0.10 to 5.00 percent
Resolution: 0.01 percent
*RST Setting 1.00
Programming Example
OUTPUT 714;"SETUP:TFERROR:CONFIDENCE:REQUIREMENT:RATIO 0.50
"
Function Sets/queries the trigger arm state for the test data service option frame error rate (TDSO FER)
measurement. The trigger arm state determines whether the TDSO FER measurement will be
made once then stop (0|OFF (single)), or automatically re-arm upon completion of one
measurement and repeat the process (1|ON (continuous)).
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Programming Example
OUTPUT 714;"SETUP:TFERROR:CONTINUOUS OFF
"
!Sets measurement to single trigger mode.
Function Sets/queries the number of frames to be counted during a test data service option frame error
rate (TDSO FER) measurement.
Setting Range: 512 to 999,936
Resolution: integer multiples of 512
Query Range: 512 to 999,936
Resolution: integer multiples of 512
*RST Setting 512
Programming Example
OUTPUT 714;"SETUP:TFERROR:COUNT 1536"