Agilent Technologies 8960 Series Reference Guide

605
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_status_questionable.fm
STATus:QUEStionable
STATus:QUEStionable:CALL:CDMA Condition Register Bit Assignment
The STATus:QUEStionable:CALL:CDMA registers will contain information about which event(s) occurred
during call processing that indicate what call processing procedure failed
Program Example - STATus:QUEStionable:CALL:CDMA Register Bit Assignment
OUTPUT 714;”STATUS:QUESTIONABLE:CALL:CDMA:EVENT?”
!Queries and clears the Questionable Call CDMA Event Register
OUTPUT 714;”STATUS:QUESTIONABLE:CALL:CDMA:CONDITION?”
!Queries and clears the Questionable Call CDMA Condition Register
OUTPUT 714;”STATUS:QUESTIONABLE:CALL:CDMA:ENABLE 1024”
!Sets the Questionable Call CDMA Enable Register for bit 10
OUTPUT 714;”STATUS:QUESTIONABLE:CALL:CDMA:NTRANSITION 2”
!Sets the Questionable Call CDMA Negative Transition Filter Register !for bit 1
OUTPUT 714;”STATUS:QUESTIONABLE:CALL:CDMA:PTRANSITION 2”
!Sets the Questionable Call CDMA Positive Transition Filter Registerfor bit 1
Bit
Number
Binary
Weighting
Condition Description
15 32768 Not Used. Defined by SCPI. This bit is always 0.
14 16384 MUI Maskable Message.
13 8192 Reserved for future use. This bit is always 0.
12 4096 Reserved for future use. This bit is always 0.
11 2048 Reserved for future use. This bit is always 0.
10 1024 Reserved for future use. This bit is always 0
9 512 Reserved for future use. This bit is always 0.
8 256 Reserved for future use. This bit is always 0.
7 128 Reserved for future use. This bit is always 0.
6 64 Reserved for future use. This bit is always 0.
5 32 Reserved for future use. This bit is always 0.
4 16 Call drop timer timed out. This bit is a 1 after 250 consecutive bad frames are
counted indicating that the reverse link is lost
3 8 Service connect completion not
received.
This bit is a 1 when the test set has not received a
message from the MS that it has completed the
change to a new Service Option or Radio
Configuration.
2 4 Service Option or Radio
Configuration rejected by MS.
This bit is a 1 when the MS receives a Service Option
or a Radio Configuration that it does not support.
1 2 Traffic channel preamble not
received.
This bit is a 1 if no preamble was received from the
MS.
0 1 Extension Bit. This bit is always 0.

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English