661
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_op_overview_setup_call.fm
How Do I Set Up a Call?
8. You may need to change cell settings such as SID (System Identification) to allow the mobile station to find
service. See “How Do I Change Cell Information?” on page 664.
9. Turn on power to the mobile station and wait for an indication that it has found service.
10.Make a mobile station originated call (by entering a phone number and pressing SEND on the mobile
station handset); or, wait for the mobile station to perform a power up registration and press the
Originate Call (
F3) key.
11.Verify that the call is connected.
To Next Page
Loading...
Need help?
General
