716
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_tferror.fm
TDSO FER (Frame Error Rate) Troubleshooting
TDSO FER (Frame Error Rate) Troubleshooting
TDSO FER Setup Issues
TDSO FER results may take up to 20.48 seconds to display
A call must be setup using SO32 (+F-SCH) and that call must be currently connected.
If “No F-SCH” is displayed in the bottom right portion of the display, the supplemental channel is not
connected. If “No Sync” is displayed, the sync channel has not been sent to the mobile station yet.
The TDSO FER test returns the confidence level based on the actual average FER result obtained over the
fixed frame count length. If the confidence level is less than 95% for the specified FER confidence requirement,
the test has not passed minimum standards.
Integrity indicators do not apply to this measurement.
Related Topics
“TDSO Frame Error Rate Measurement Description”
To Next Page
Loading...
