743
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_pos400.fm
+400 through +499 Error Message Descriptions
+414 Hardware failure; Fixed external reference output is
not responding
+415 Hardware failure; Instrument reference is not
responding
+416 Hardware failure; Bit clock A is not responding
+417 Hardware failure; RF source 2 frequency hardware is
not responding
+418 Hardware failure; RF source 2 digital modulation
hardware is not responding
+419 Hardware failure; RF source 2 level hardware is not
responding
+420 Hardware failure; RF source hopping hardware is not
responding
+421 Hardware failure; Digital demod hopping hardware is
not responding
+422 Hardware failure; Misc VI hardware is not responding
+423 Hardware failure; Unable to access networking
information
+424 Hardware failure; Bit clock B is not responding
+425 Hardware failure; Invalid EEPROM checksum
<EEPROM board ID>
See the list of EEPROM board ID names below.
+426 Hardware failure; Unable to write to EEPROM
<EEPROM board ID>
See the list of EEPROM board ID names below.
+427 Hardware failure; Unable to read from EEPROM
<EEPROM board ID>
See the list of EEPROM board ID names below.
+428 Hardware failure; Board not identified <board ID> See the list of board ID names below.
+429 Hardware failure; Could not create board
identification <board ID>
See the list of board ID names below.
+430 Hardware failure; Control version not compatible with
FW <board ID>
See the list of board ID names below.
+431 Hardware failure; RF IO DAC cannot be calibrated
due to present temperature
+432 Hardware failure; RF hardware is not responding
+433 Hardware failure; RF source FM hardware is not
responding
+434 Hardware failure; Audio source FM hardware is not
responding
Error Message Description
To Next Page
Loading...
Need help?
General
