742
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_pos400.fm
+400 through +499 Error Message Descriptions
+400 through +499 Error Message Descriptions
Description
These errors are generated when a problem occurs in one of the test set’s hardware modules that is part of the
test set’s core instrument.
When one of these errors is generated, the ‘+400 errors’ bit in the questionable error status register is set.
Error Message Description
+400 Hardware failure; Hardware is not available
+401 Hardware failure; Protocol processor hardware is not
responding
+402 Hardware failure; Demod receiver hardware is not
responding
+403 Hardware failure; Measurement receiver hardware is
not responding
+404 Hardware failure; RF source 1 hardware is not
responding
+405 Hardware failure; RF source 1 digital modulation
hardware is not responding
+406 Hardware failure; RF source 1 level hardware is not
responding
+407 Hardware failure; DSP demod control hardware is not
responding
+408 Hardware failure; 2nd demod receiver hardware is not
responding
+409 Hardware failure; Base station emulator trigger
hardware is not responding
+410 Hardware failure; Audio source hardware is not
responding
+411 Hardware failure; RF source 2 hardware is not
responding
+412 Hardware failure; Internal voltmeter hardware is not
responding
+413 Hardware failure; Fixed timebase input is not
responding
To Next Page
Loading...
