741
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_pos300.fm
+300 through +399 Link Control Device-Specific Error
+300 through +399 Link Control Device-Specific Error
These errors are generated when a problem occurs in maintaining the link between the test set and a DUT.
These errors generally occur when a message is received from the DUT that is unexpected.
When one of these errors is generated, the ‘+300 errors’ bit in the questionable error status register is set.
Refer to “Standard Event Status Register” on page 623 for information on this register.
No link control errors are currently defined for this test application.
To Next Page
Loading...
Need help?
General
